Tubing Connectors and Fittings
AVANTOR MASTERFLEX (VWR LLC) Masterflex Fitting, Polycarbonate, Straight, Male Luer Lock to Hose Barb Adapter, 1/8"" ID; 25/PK
These luer fittings are ideal for a variety of applications, including syringes or small tubing. Barbed adapters feature three styles of barbs: standard, wide-bore, and low-profile. Wide-bore barbs offer enhanced fluid flow through the fitting and are usable with any flexible tubing. Low-profile barbs are ideal for use with semi-rigid tubing, such as nylon, polyethylene, or polypropylene. Manufactured in compliance with ISO 594-1 standards, these fittings are cleaned, inspected and fully traceable. All parts meet tight dimensional tolerances for increased reliability and process purity. Hose barbs are available from 1/16" to 1/4" with either male or female luer connections. Male luer connections are available with either integral lock ring or separate lock ring. Hose barbs are available from 1/16" to 1/4" with either male or female luer connections. Male luer connections are available with either integral lock ring or separate lock ring.
Chemglass Life Sciences Adapter, Claisen, 24/40 Joint Size, 165mm H x 90mm W
Adapter, Claisen, 24/40 Joint Size, 165mm H x 90mm W. Outer standard taper joints on both top arms and lower inner joint. All three joints are the same size.
Chemglass Life Sciences O-Ring Joint, 50mm ID, 56mm Tube OD , O-Ring Size: 229, Clamp Size: 75
O-Ring Joint, 50mm ID, 56mm Tube OD , O-Ring Size: 229, Clamp Size: 75. Joint has an o-ring groove to accept the listed o-ring size. Provides for a grease-free, vacuum seal when used with CG-150 clamps. Each joint is supplied with a Viton o-ring of the listed size.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Fitting, Polycarbonate, Tee, Female Luer x Female Luer; 25/PK
Easily complete your luer fittings systems with these premium connectors. Included are some special configurations available only in polycarbonate. All female ports may be used with either slip or luer lock connections. Plugs and caps are also available. Polycarbonate material has good chemical compatibility and can be sterilized via ethylene oxide or gamma irradiation.
Chemglass Life Sciences Adapter, Distillation, 75°, 24/40 Inner Joints, 10/30 Thermometer Joint For 75mm Immersion
Adapter, Distillation, 75¿, 24/40 Inner Joints, 10/30 Thermometer Joint For 75mm Immersion. Adapter has a standard taper outer joint at the top of the main tube for use with jointed thermometers. The 10/18 size is used with 10/18, 25mm immersion thermometers while the 10/30 is for use with 10/30, 75mm immersion thermometers. With inner joints on the bottom and sidearm at a 75¿ angle to one another.
AVANTOR MASTERFLEX (VWR LLC) FITTING,POLYPRO,LUER/PLUG,25/P
Masterflex Fitting, Polypropylene, Straight, Male Luer to Plug Adapter; 25/PK
Chemglass Life Sciences Adapter, Flow Control, Straight, 2mm Stpk, 24/40 Inner Joint
Adapter, Flow Control, Straight, 2mm Stpk, 24/40 Inner Joint. Used to regulate the flow of gases or liquids into reaction systems. PTFE stopcock has a bore of 2mm. Hose connection has an O.D. of 8mm at the middle serration.
Chemglass Life Sciences Adapter, Bushing, 29/42 Lower Inner, 24/40 Top Outer
Adapter, Bushing, 29/42 Lower Inner, 24/40 Top Outer. Bushing style adapter having a lower standard taper inner joint and outer joint ground in the bore of the adapter. Adapters having a 10/18 or 10/30 outer member in the bore are used to insert thermometers into apparatus.
Chemglass Life Sciences Adapter, Universal, Inlet, 24/40 Inner Joint, #15 Chem-Thread, Hose Connection, Accepts O.D./12-15mm, O-Ring/206
Adapter, Universal, Inlet, 24/40 Inner Joint, #15 Chem-Thread, Hose Connection, Accepts O.D./12-15mm, O-Ring/206. Adapter has the listed size of Chem-Thread at the top for a vacuum tight seal of a variety of tubing diameters. Will accept glass, metal or heavy wall plastic tubes having diameters between 7 to 18mm O.D. such as thermometer wells, gas dispersion tubes, plain stem funnels, etc. Serrated hose connection has an O.D. of 10mm at the largest serration. Adapters are supplied complete with a Celcon compression cap and Viton o-ring.
Chemglass Life Sciences Stopper, Polyethylene, 29/26 and 29/42
Stopper, Polyethylene, 29/26 and 29/42. Inexpensive, tapered stopper provides for a tight, leak-proof fit while the top ring permits the stopper to be easily removed. Stoppers are made of yellow Polyethylene. SOLD 100/PKG.
Across International Ai GL18 Chilling Fluid or Vacuum Connectors - Pack of 5
GL18 chilling fluid or vacuum connector with sealing gasket, pack of 5. Fits our SolventVap rotary evaporators and glass jacketed reactors.
AVANTOR MASTERFLEX (VWR LLC) Barbed fittings, Straight Connectors, 1/8"", Polypropylene, 25 pack
Barbed fittings, Straight Connectors, Polypropylene, 1/8" ID, 25/Pk, Quick and easy assembly without toolsIdeal for low-pressure applicationsChemical resistantAvailable in a variety of sizes, materials, and configurations
Chemglass Life Sciences 12mm pH Electrode Adapter, 24/40
Adapter permits CG-1872 series pH electrode(12mm OD) to be inserted either directly into smaller reactors or down through a CG-1872-B baffle.CG-1872-A-01 compression 24/40 joint adapters are to be used with the CG-1872-01 and CG-1872-02 electrodes/probes. The adapter allows use of these probes with reactors up to 4L having lids with a 24/40 neck joint size.Code CG-1872-A-10 is for use CG-1872-03 probes with the open bottom baffles for 10L and larger reactors.